Kensington Heated Towel Rail
With its bold central column and beautifully manufactured brass legs, the Kensington Heated Towel Rail from Rutland London is well suited to historic properties where a high output heating solution is sought.
Handmade to order in our family-owned factory in Hampshire, the Kensington towel warmer features high quality 32mm diameter brass DZR tube along with brass 75mm wall and floor plates and a timeless high output Italian column radiator.
The Kensington Heated Towel Rail can be operated directly from a heating system or as a stand alone electric radiator where pipework or plumbing installation is limited. Please note however that this product should only be installed on a closed circuit system and that we do not recommend fitting on a salt softened water system unless otherwise agreed with your installer. In addition, please note that this product cannot be fitted on a hot water system.
If all year round usage is required, we recommend using a combination of both heating configurations by way of a dual fuel configuration.
The Kensington Heated Towel Rail is available to purchase today on our website in Polished Chrome, Polished Nickel and Polished (Unlacquered) Brass.
Should you require a variation of this design or for more elaborate finishes such as Bronze, Brushed Copper and Polished Gold we encourage you to email firstname.lastname@example.org or to call +44 (0) 20 7993 6736.
HEAT OUTPUTS & TECHNICAL INFORMATION
Heated towel rails manufactured by Rutland London have been independently type tested to confirm their essential performance characteristics in accordance with EN 442 and other key harmonised standards.
When purchasing a heated towel rail or radiator, care should always be taken to ensure the product is compliant with the relevant directives and standards. Non-compliant products from other manufacturers are likely to be inefficient and could possibly be dangerous.
Essential Characteristics (EN 442):
|Reaction to fire:||A1|
|Release of dangerous substances:||None|
|Pressure tightness:||No leakage at 1,3 x MOP [520 kPa]|
|Surface temperature:||Maximum 85°C|
|Resistance to pressure:||No breakage at 1,69 x MOP [520 kPa]|
|Resistance against corrosion:||No corrosion after 100 h humidity|
|Resistance against minor impact:||ISO 2409:2013-1A-0|
Heat Outputs (EN 442):
|Size (mm):||Standard rated thermal output Φ50 (W):|
|777 (H) x 500 (W) x 150 (D)||363
|777 (H) x 685 (W) x 150 (D)||533
|777 (H) x 837 (W) x 150 (D)||700
|777 (H) x 989 (W) x 150 (D)||867
The above technical information is based on the towel rail being supplied in a polished or brushed finish and configured for installation on a central heating system.
Bespoke sizes will have no performance declared ("NPD") for heat output unless stated otherwise. Should a heat output be required for a bespoke size, a non-refundable deposit will be required.
Electric Only / Dual Fuel Configurations:
When supplied in either an Electric Only or Dual Fuel heating configuration, this heated towel rail complies with EN 60335-1, EN 60335-2-30 & EN 60335-2-43.
Declaration of Performance:
Should you require the Declaration of Performance for this product, please email email@example.com.